Bamboo Maui -Paneling

PANELING

PANEL BOARD: Unfinished boards are available to match Timbergrass series flooring in natural and caramelized colors in both vertical grain and flat grain patterns. Common uses are for stair tread, cabinetry, shelving, and furniture. Specifications: 48"x 12" or 74"x 12"

3 PLY PANEL SHEETS: Unfinished panels to match our Timbergrass series flooring in natural and caramelized colors. Panels have a 1/2" vertical core with 1/8" outer shell on both sides in either vertical or flat grain. Common uses are for mill work, trim, molding, and cabinetry. Specifications: 48"x 96"x 3/4"

RAW RUSTIC GREEN & AMBER TAMBOUR: Panels are composed of 5/8" strips of bamboo adhered to an open weave canvas backing. The horizontal strips are processed on 3 sides, but the top side is left natural in appearance. The green colored panel actually turns yellow over time. Unlimited potential. Specifications: 48" x 96" x 3/16"

UNFINISHED NATURAL & AMBER TAMBOUR: Panels are composed of 3/4" strips of bamboo adhered to a closed weave canvas backing. The horizontal strips have been processed on all sides. The top side is sanded and ready to take any stain or finish of your choice.
Specifications: 48" x 96" x 3/16"

BAMBOO VENEER: A 1/4" thick unfinished veneer available in natural and caramelized colors. Often used for cabinets, tabletops, furniture, doors and wall paneling. Specifications: 16"x 72"x 1/4"

WOVEN PLYWOOD: Panel are composed of 3/4" wide strips of bamboo woven into a herringbone pattern. The sheets are a light natural to blond color have been machine pressed and glued. This is our most popular panel. Uses included everything from wall and ceiling panels to flooring and table tops. Specifications: 96" x 48" x 1mm and 96" x 48" x 2mm

SMALL WEAVE: This panel is very similar to the woven plywood except the bamboo strips are only 1/2” wide and the pattern is of expanding rectangles getting larger from the center. Panels are glued and pressed. Looks very nice as a ceiling or wall covering. Specifications: 96” x 48” x 1mm

WOVEN SKIN: Panel are composed of 1/2” wide strips of bamboo tightly woven into a step pattern. The color is varying shades of tans and browns. Similar to Bali bedegs, but much easier to work with. Instantly imparts a natural tropical look. Specifications: 96” x 48” x 2mm

WOVEN VERTICAL STRIPS: Composed of 1/4” wide strips of raw bamboo woven vertically and horizontally. The weave is more open and textured than our other panels. If your looking for a rustic island feel this panel is the one for you. A lot of bang for the buck. Specifications: 3’ x 12’

Please visit our new
Bamboo Maui Showroom
1878 Wili Pa Loop
Wailuku HI. 96793

Mailing address:
P.O. Box 1433
Wailuku, HI 96793

Mike@bamboomaui.com

Sales & Ordering (808) 244-2299
Toll Free 866-472-9026
Fax (808) 244-3378